Current Students :
is working on his PhD with my group since Spring 2009, in the areas of GPU based extraction of the Gene Regulatory Network for cancer, as well as in the design of special function units to accelerate computing, and on cryptographic key generator circuits. Kent received his BS degree from UC Berkeley, and his MS degree from Yale University.
is working on his PhD with my group since Spring 2010, in the areas of resonant clock based source-synchronous Network on Chip (NoC) design, special purpose functional units for hash and sort operations, and on low-jitter clock distribution networks. Ayan received his BS degree from IIT Kharagpur, India. Ayan is co-advised by Prof. Rabi Mahapatra (CS, TAMU).
is working towards his PhD degree since Fall 2010. His research consists of FPGA circuits that can explore the power-delay tradeoff by operating from sub-threshold through full supply operation. Monther has his BS and MS degrees from Montana State University, Bozeman, MT.
started on his PhD degree in Fall 2011. His research interests include GPU based implementations of algorithms (Boolean Satisfiability, radiation transport), and radiation detection circuits. Amr obtained his BS from Cairo University in Egypt in 2009, and worked as a software engineer (at IBM, Mentor Graphics and Cerner Corp.) between 2009 and 2011.
is working on his PhD degree since Spring 2012. His research is in the design of fast special function units using memristor devices. Suraj obtained his BS from IIT Roorkee in India in 2007, and worked at ST Microelectronics from 2007 to 2011.
is working on his MS degree since Fall 2010. His research consists of partitioning RTL netlists for FPGA based emulation. Subramanian has his BS degree from NIT Trichy in India.
is working on his MS degree since Spring 2011. His research is on fast FFT computations using Sum-of-Product (SOP) based architectures. Rajeev has his undergraduate degree from IIT Guwahati in India, in 2007. Rajeev worked at ARM from 2007 to 2010.
has been working on his MS degree since Fall 2011. His research is on resilient clock networks. Darshit obtained his BS in EE from BITS Pilani in India, in 2011.
Past Students :
obtained her PhD degree in Fall 2009. Kanu’s PhD dissertation was on the use of Graphics Processing Units (GPUs) for EDA. In addition, Kanu worked on logic synthesis techniques for leakage computation, hierarchical don’t care computation and BDD-based synthesis of structured ASICs. Kanupriya has a B.S. from the Delhi College of Engineering, India, and an M.S. degree in ECE from Texas A&M University (from my group). Kanu’s M.S. thesis was on efficient means to compute circuit leakage histograms and to compute the input vector that minimizes leakage for combinational circuits. Kanu is currently with Intel Corporation in Hillsboro, OR.
defended his Ph.D. in Spring 2009. Rajesh’s Ph.D. work was on radiation-tolerant circuit design and pass transistor logic. Rajesh obtained his B.S. from the Indian Institute of Technology, Delhi, India. Rajesh obtained his M.S. in ECE from Texas A&M University in Spring 2006 (from my group). His M.S. thesis was on generalized buffering in pass transistor structures, using Boolean division and Approximate Compatible Observability Don’t Cares (ACODCs). Rajesh is currently with Intel Corporation in Hillsboro, OR.
received his Ph.D. in 2008. His dissertation was on capacitive cross-talk alleviation in on-chip buses using specialized CODECs. Chunjie has a M.S. from Colorado State University and a B.S. from Tsinghua University in China. Chunjie works at the Mitsubishi Electric Research Laboratories (MERL) in Boston, MA.
obtained his Ph.D. candidate in Fall 2007, working on design automation techniques for datapath circuit design, including datapath synthesis and routing. Sabya’s work included datapath synthesis tools for area-critical as well as timing-critical datapath components such as adders, Sum-of-Product (SOP) blocks, shifters. Sabya has a B.S. from Jadavpur University, India, and an M.S. degree in ECE from the University of Massachusetts, Amherst. Sabya is currently with Xilinx Inc, in Santa Clara, CA.
obtained his Ph.D. in 2006. His PhD dissertation work was on the minimization and exploitation of leakage in contemporary VLSI design. This work included leakage minimization by using a novel low-leakage standard cell approach, and a methodology to minimize total leakage via optimal reverse body bias. Also, it included approaches to exploit leakage using subthreshold circuit design, and means to minimize energy and maximize performance via micro-pipelining in this framework. Nikhil is currently with Juniper Networks in San Jose, CA.
obtained his Ph.D. in 2005. Brock’s dissertation work was on high-speed board-level design (performance model of off-chip buses including inductive cross-talk effects, controlling inductive cross-talk in off-chip buses using CODECs, and static/dynamic techniques to adjust package inductance to match the board). Brock is currently with Montana State University in Bozeman, MT.
obtained his MS degree in Summer 2010. Rajesh’s thesis work involved radiation tolerant VLSI design. Rajesh obtained his B.S. from IIT Roorkee, and has 2 years experience with ST Microelectronics.
obtained his MS degree in Summer 2010. Vinay’s was on resonant clocking for VLSI design. Vinay obtained his B.S. from IIT Madras, India, and has 1 years experience with Cypress Semiconductor.
obtained his MS degree in Fall 2009. Kalyana’s MS work included techniques to perform fast IP routing table lookup using Logic Minimization techniques. In addition, Kalyana worked on GPU based MIMO decoding, noise based logic, low-leakage SRAM design and unicast network coding for on-chip wiring improvement. Kalyan obtained his B.S. from IIT Bombay, and has 3 years experience with Infineon Technologies. Kalyana is currently with NVIDIA Corporation in San Jose, CA.
obtained her M.S. degree in Spring 2008. Charu’s thesis was on developing techniques to perform radiation tolerant circuit design. Charu has a B.S. in EE from the Netaji Subhas Institue of Technology in Delhi, India. Charu is currently with Intel Corporation in Austin, TX.
obtained his M.S. degree in Fall 2007. Suganth’s work included techniques to perform fast computer arithmetic, approximate computation of the logarithm function in hardware, and a sub-threshold BFSK transmitter chip, implemented in a 0.25 micron processor. Suganth has a B.S. from the College of Engineering Guindy (Anna University), Chennai, India. Suganth is with Intel’s ATOM processor group in Austin, TX.
obtained his MS degree in Fall 2007. Jeff’s work was on efficient computatation of multi-node logic optimization in logic synthesis. Jeff obtained his B.S. from Texas A&M University. Jeff is currently with Texas Instruments, in Houston, TX.
obtained his M.S. degree in Summer 2007. Sasidharan’s work was on techniques to reduce the energy and energy-delay product in serial data communication, as well as custom VLSI implementaiton of MIMO sphere decoding algorithms. Sasidharan was co-advised by Prof. K Narayanan. Sasidharan has a B.S. from the College of Engineering Guindy (Anna University), Chennai, India. Sasidharan is currently with Link-A-Media in Santa Clara, CA.
obtained his M.S. candidate in Spring 2007. Karandeep’s work was on techniques to perform sensitizable timing analysis of VLSI circuits, in the presence of data-dependent delays. Karandeep has a B.S. from Punjab Engineering College, Chandigarh, India. Karandeep is currently with Texas Instruments, in Houston, TX.
obtained his Honors B.S. candidate in ECE. Salman’s Honors thesis explores techniques to perform low-NRE structured ASIC design using very simple primitive gates. Salman is currently with National Instruments in Austin, TX.
If you are interested in pursuing studies in VLSI, please
send me email . Include test scores, undergraduate grades and class rank, information about projects conducted and your degree goal. Please do not send Word documents, rather send this information in ASCII text or PDF format. Thanks!